Triquetra

Topic's about PicSender
Forum rules
Be Kind to other's.
No Cussing or Swearing.
Don't post anything Illegal or Obscene.
Image attachment size limit is 500 KiB.
davet354tfd
Posts: 12
Joined: Thu Aug 01, 2019 5:34 pm

Triquetra

Postby davet354tfd » Wed Mar 03, 2021 4:23 pm

Thinking about geting a Triquetra.

So far i have not found anything on how it interfaces with picsender (if it can).

Any help or suggestions would be great.

Thanks

Bob

User avatar
Picengraver
Full Access Moderator
Posts: 394
Joined: Tue Dec 23, 2014 5:40 pm
Contact:

Re: Triquetra

Postby Picengraver » Thu Mar 04, 2021 8:33 am

Bob,
The Triquetra uses a standard gcode file to zero your bit to a work piece. There is no special "interface" required for using one with PicSender. I have used one since Charlie first started producing them. You can load the gcode file for your Triquetra into one of the QCodes positions (click the blue Quick Codes button) so it is easy to run whenever you need it. More info is in the PicSinder Tutorial (click the Help or Tutorial button at the bottom of the PicSender screen, then click the yellow Tutorial button on the popup window). Please let me know if you need more info.
John Champlain
QCode.jpg
QCode.jpg (83.81 KiB) Viewed 592 times

Tutorial.jpg
Tutorial.jpg (171.69 KiB) Viewed 592 times

davet354tfd
Posts: 12
Joined: Thu Aug 01, 2019 5:34 pm

Re: Triquetra

Postby davet354tfd » Thu Mar 04, 2021 10:53 am

John:

So what you are telling me, is that it works well with picsender and it makes zeroing easy.
Will look into the tutorial.

Thanks

Bob

User avatar
Picengraver
Full Access Moderator
Posts: 394
Joined: Tue Dec 23, 2014 5:40 pm
Contact:

Re: Triquetra

Postby Picengraver » Thu Mar 04, 2021 2:28 pm

Yes, it make zeroing your bit to your work piece much easier, and allows you to recover easier from some carving/machine mishaps.
You can also contact Charley Thomas directly for additional help:
https://triquetra-cnc.com/


Return to “PicSender”

Who is online

Users browsing this forum: No registered users and 0 guests

cron