Trying to open picsender on my ofice PC but asks for my registration code....didn't write it down...
I apparently have to load the file and edit out the m7...?
Only is a problem exporting from Easel on lap top
import g code from easel
Forum rules
Be Kind to other's.
No Cussing or Swearing.
Don't post anything Illegal or Obscene.
Image attachment size limit is 500 KiB.
Be Kind to other's.
No Cussing or Swearing.
Don't post anything Illegal or Obscene.
Image attachment size limit is 500 KiB.
-
Picengraver
- Full Access Moderator
- Posts: 390
- Joined: Tue Dec 23, 2014 5:40 pm
- Contact:
Re: import g code from easel
We will resend your registration email shortly.
Maybe there is a setting is Easel to stop adding M7???
EDIT: Email sent
Maybe there is a setting is Easel to stop adding M7???
EDIT: Email sent
-
Chic Dortmund
- Posts: 7
- Joined: Fri Nov 27, 2020 3:17 pm
Re: import g code from easel
FYI...Easel under machine/advanced has a checkbox to allow the addition of M7, M8, M9 to generated files. Must have that option checked on my lap top. Was a newer addition under the beta version of the software.....wasnt aware...
Thanks for all your help and support. Maybe this will help someone else if the problem crosses your desk again.
Great program....just finr tuning the learning curve.
Chic Dortmund
Thanks for all your help and support. Maybe this will help someone else if the problem crosses your desk again.
Great program....just finr tuning the learning curve.
Chic Dortmund
-
Picengraver
- Full Access Moderator
- Posts: 390
- Joined: Tue Dec 23, 2014 5:40 pm
- Contact:
Re: import g code from easel
Thank you for the feedback.
All the best,
John
All the best,
John
Return to “CNC Controller Discussions”
Who is online
Users browsing this forum: No registered users and 2 guests