$30 setting

Topic's about PicEngrave Pro 5 or 6
Forum rules
Be Kind to other's.
No Cussing or Swearing.
Don't post anything Illegal or Obscene.
Image attachment size limit is 500 Kib.
tdukes
Posts: 6
Joined: Thu May 23, 2019 9:09 am

$30 setting

Postby tdukes » Fri Nov 27, 2020 9:56 am

I'm using GRBL 1.1f and have been setting $30=1000. I noticed in Picsender its set to 255.

Ok to leave there or change it to 1000?

TIA

User avatar
Picengraver
Full Access Moderator
Posts: 394
Joined: Tue Dec 23, 2014 5:40 pm
Contact:

Re: $30 setting

Postby Picengraver » Fri Nov 27, 2020 4:55 pm

You can do either one for spindle use. But if using a laser, it will probably work best set at 255. What this setting does is change the range of values that PWM uses to go from zero to max of about 5v.
John

tdukes
Posts: 6
Joined: Thu May 23, 2019 9:09 am

Re: $30 setting

Postby tdukes » Sat Nov 28, 2020 7:20 am

Thanks for the info, John!

User avatar
Picengraver
Full Access Moderator
Posts: 394
Joined: Tue Dec 23, 2014 5:40 pm
Contact:

Re: $30 setting

Postby Picengraver » Sat Nov 28, 2020 5:11 pm

Thank you Thomas,
Hope it helped.
John


Return to “PicEngrave Pro 5 or 6”

Who is online

Users browsing this forum: No registered users and 2 guests

cron