Our Laser Art Gallery Collection

Postby **Picengravertoo** » Tue Sep 19, 2017 2:08 pm

This is a compilation of our B&W and grayscale laser image engravings using PicLaser or PicEngrave Pro & PicSender (grbl) or Mach3.
No complicated Vector laser engraving software used here!! :ap)

On Sale:
PicEngrave Pro 6 and PicLaser to PicEngrave Pro 6 Upgrade at 15% Off.
https://www.picengrave.com/PicEngrave_Pro_6_+_Laser.htm
https://www.picengrave.com/PL_To_PEP_6_Upgrade.htm

Postby **Picengravertoo** » Tue Sep 19, 2017 2:12 pm

This was done with the J-Tech 2.8W laser on Poplar.

: 1.jpg (288.79 KiB) Viewed 27707 times

: 2.jpg (301.14 KiB) Viewed 27707 times

: 3.jpg (353.69 KiB) Viewed 27707 times

: 4.jpg (302.56 KiB) Viewed 27707 times

Postby **Picengravertoo** » Tue Sep 19, 2017 2:13 pm

: 5.jpg (464.57 KiB) Viewed 27708 times

: 6.jpg (438.92 KiB) Viewed 27708 times

This one was done with a 1bit black & white dithered image.

: 7.jpg (304.35 KiB) Viewed 27708 times

: 8.jpg (266.44 KiB) Viewed 27708 times

Postby **Picengravertoo** » Tue Sep 19, 2017 2:14 pm

: 9.jpg (351.67 KiB) Viewed 27707 times

: 10.jpg (288.96 KiB) Viewed 27707 times

: 11.jpg (322.1 KiB) Viewed 27707 times

This one was done with a 1bit black & white dithered image on the back of a mirror.

: 12.jpg (559.13 KiB) Viewed 27707 times

Postby **Picengravertoo** » Tue Sep 19, 2017 2:17 pm

: 13.jpg (573.27 KiB) Viewed 27706 times

: 14.jpg (444.2 KiB) Viewed 27706 times

: 15.jpg (270.42 KiB) Viewed 27706 times

This was done with PicEngrave Pro 5 and the J-Tech PicConvert board with laser analog modulation using Mach3.

: 16.jpg (243.82 KiB) Viewed 27706 times

Postby **Picengravertoo** » Tue Sep 19, 2017 2:18 pm

On Brown Chipboard.

: 17.jpg (398.68 KiB) Viewed 27705 times

On Grey Chipboard.

: 17-2.jpg (471.75 KiB) Viewed 27666 times

: 18.jpg (419.75 KiB) Viewed 27705 times

: 19.jpg (416.65 KiB) Viewed 27705 times

: 20.jpg (366.8 KiB) Viewed 27705 times

Postby **Picengravertoo** » Tue Sep 19, 2017 2:20 pm

: 21.jpg (225.17 KiB) Viewed 27702 times

: 22.jpg (155.53 KiB) Viewed 27702 times

: 23.jpg (202.79 KiB) Viewed 27702 times

Postby **Picengravertoo** » Tue Sep 19, 2017 2:25 pm

Wagner, our little helper laser engraved on a mirror.

: 24.jpg (248.62 KiB) Viewed 27702 times

: 25.jpg (130.36 KiB) Viewed 27702 times

: 26.jpg (128.74 KiB) Viewed 27702 times

: 27.jpg (174.48 KiB) Viewed 27702 times

Postby **Picengravertoo** » Tue Sep 19, 2017 2:28 pm

Mirror with no back lighting.

: 28.jpg (123.02 KiB) Viewed 27701 times

Back lit.

: 29.jpg (187.06 KiB) Viewed 27701 times

The back of the laser engraved mirror.

: 30.jpg (100.46 KiB) Viewed 27701 times

: 31.jpg (173.06 KiB) Viewed 27698 times

Postby **Picengravertoo** » Tue Sep 19, 2017 2:36 pm

: 32.jpg (133.21 KiB) Viewed 27697 times

: 33.jpg (106.67 KiB) Viewed 27697 times

: 34.jpg (126.52 KiB) Viewed 27697 times

: 35.jpg (164.43 KiB) Viewed 27697 times

PicEngrave Forum